Assembly
Three steps, one afternoon.
Every kit is machined to the same modular standard, so the install is the same whether you ordered 2 feet of rain curtain or 8 feet of gold spillway.
1
Level the base track
Snap the aluminum base track onto your coping or overflow channel using the included alignment clips. The integrated shim system gets the lip dead level, which is what makes the sheet look right.
2
Click the unit in
The prefabricated housing drops into the track and locks with two quarter-turn latches. No wet-setting, no mortar, no cutting stone.
3
Plumb and play
Connect your standard 1.5" PVC feed line to the pre-installed rear inlets with the tool-less locking collars, prime the pump, and open the flow valve.
Before you order
- Do I need a pool contractor?
- No. Most owners finish in three to four hours. If you would rather not, any pool service tech can install it on a routine visit.
- Will it fit my pool?
- Kits fit any standard coping between 10 and 16 inches deep. Order the free measuring template if you are unsure before you buy.
- What ships in the box?
- Housing, spillway face, base track, shims, locking collars, hardware and a printed assembly guide. All you supply is the PVC run.